Brand new in box Icom IC756 Pro III. Basically unboxed, inspected, and then placed back in the box and in the closet. Serial number is : 3204610. The item “Icom IC 756 PROIII Radio Transceiver NIB New in box late serial number” is in sale since Thursday, April 28, 2016. This item is in the category “Consumer ElectronicsRadio CommunicationHam, Amateur RadioHam Radio Transceivers”. The seller is “drweir1″ and is located in Pittsburg, California. This item can be shipped to United States.
* Under the following conditions: Receive frequency 14.2MHz, Input frequencies 14.3MHz and 14.4MHz, Pre-amp OFF, mode USB BW: 2.4 kHzNewly designed pre-amplifiers
The IC-756PROIII has two pre-amplifiers, which offer advantages in bad band conditions. Both pre-amplifiers of the IC-756PROIII have basically the same circuit construction as the IC-7800’s preamplifiers. The preamp-1 is a noiseless feedback type with push-pull amplifiers. It has a high intercept point and covers a wide frequency range. The preamp-2 is a high gain pre-amplifier using bipolar transistors. It offers excellent advantages in using narrow band antennas such as a small loop or short Yagi antenna. This combination will provide the optimum receiver performance under any conditions. Real time spectrum scope with mini scope function
The real time spectrum scope is now an indispensable tool for high-class HF radios. The IC-756PROIII’s spectrum scope adds the mini scope function answering the many requests from end users to add this feature. The mini scope function allows you to monitor the scope screen while you are using other function menus. For example, you can monitor the scope screen even while you are changing the IF filter shape or other level settings. The scope range can be set in 4 steps 12.5 kHz, 25 kHz, 50 kHz and 100 kHz, centred on the receiving frequency. In addition, the spectrum scope has 3 levels of attenuator (10dB, 20dB and 30dB).
The 4 memory keyer messages store often-used CW sentences. Each memory has up to 55 character capability. The “@” code used in e-mail addresses can be sent from the memory keyer. The “@” code, (• – – • – • –) has been added to the International Morse code list recently. In addition, the serial contest number can be counted automatically. 19 cut number function is included.
32-bit floating-point DSP and 24-bit AD/DA converter
The 32-bit floating-point DSP and 24-bit AD/DA converter maximises the IC-756PROIII digital capabilities. This makes it possible to work a lot of digital features. In practice, the AD/DA converter realises surprisingly wide dynamic range. It provides clean and clear transmit, and crystal clear audio reception. AGC loop operation
The digital IF filter and manual notch are included in the AGC loop controlled by the DSP unit. It basically rejects blocking by extremely strong adjacent signals out of the filter pass bands. Therefore, you will rarely suffer from blocking of the AGC gain. In addition, the AGC constants are easily adjustable for each operating mode. Sharp and soft IF filter shape are independently selectable for SSB and CW mode
Sharp and soft IF filter shapes for SSB and CW have become part of the DSP unit programming. You can change the filter shape to pick up desired signals, even while listening to the signals.
This filter has a rounded filter shape. It keeps down the band noise in high and low frequencies, and improves the signal-to-noise ratio. This setting makes it easy to distinguish very weak signals, even in low level noise, especially in the 50MHz band. This filter also has sharp skirt characteristics, similar to the SSB sharp filterCW sharp filter, ultimate sharpness
The ideal ‘sharp’ filter shape factor, only digital technology can bring you. This setting is suitable for picking up weak DX signals in crowded band conditions. The signal quality, not seen with analogue filters, can be clearly recognised. CW soft filter; broadens the filter skirts This filter improves the audio quality at
the edge of the filter skirt. This setting is useful when you run into pileups in contests or in DX peditions. Digital Twin PBT
The digital twin PBT, using the DSP unit, narrows the passband width to efficiently reduce interfering signals by in 50Hz steps. IF passband width, IF shift width and IF shift direction are indicated on the LCD display for easy recognition.
RF speech compressor
The 32-bit DSP is used for the RF speech compressor providing the maximum punch without the fuzzy sound. Even when the compression is set at a higher level, the IC-756PROIII increases the readability without distortion. The tone gradation is very similar to the original sound so that the IC-756PROIII provides excellent audio at any compression level. IC-756PROIII Additional Features
• 2 clocks . the IC-756PROIII has 2 clocks built-in which show both local and UTC time at once
• Screen saver function . when the IC-756PROIII has not been operated for a while, a screen saver will be shown on the display
- Icom 756 Pro Iii Serial Numbers Lookup
- Ic 756 Pro Iii Serial Numbers
- Icom 756 Pro Iii Manual
- Icom 756 Pro Iii Ebay
Describe your experience with the ICOM IC-756 Pro III and tell us why you give it the rating you did (required). Populous the beginning mac. Other useful information would include your experience with similar products, infomation on a product that you would purchase instead of this one, and so on. Add Review ×. Amateur Radio band plan with common country prefixes.pdf 339.67 KB About Icom; Careers; Contact; Terms of Use. All of these letter-preceded serial numbers are five digit numbers and cover the period from 1976 to 1996. Once you know the name brand of your piano, you will need to find the serial number. Step 1: The serial number is usually found on the plate of the piano between the bass and tenor strings. (IC-756Pro III User Manual, p. 7-pin DIN plug with Pins 6 (XVRT) and 7 (+12V) bridged via 27KΩ 0.25W resistor, plugged into Pro III ACC (2) socket to activate XVERT mode.Pro III.
- Brand: Icom
- Model: IC 756PROIII
- Supported Modes: AM
Back | Home › Resources › Icom Radio Archive/Discontinued Models › Amateur Radio (Ham) Archive › Amateur Radio (Ham) Base Stations
IC-756PROIII HF/50MHz All Mode Transceiver (Discontinued)The IC-756PROIII incorporates many of the features that made its predecessors so successful. However, the integration of the latest technology employed in the IC-7800 such as receiver technology, +30dBm class IP3, miniscope makes this new rig the very pinnacle of the IC-756PRO series.
Bianchi bvm vending manual. SSB transmit bandwidth adjustable
The built-in audio equaliser has separate bass and treble adjustment for a total of 121 combinations, so you can tone your voice up or down when you want. In addition, the SSB transmit bandwidth is selectable from 100, 300, 500Hz at the high-pass edge, and 2500, 2700, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be stored in the memory. Mac software update mojave. With this flexibility of DSP based waveform shaping, transmit audio quality is adjustable depending on the operating situation.
+30dBm class IP3 (in 14MHz band), Excellent distortion resistance characteristics The built-in audio equaliser has separate bass and treble adjustment for a total of 121 combinations, so you can tone your voice up or down when you want. In addition, the SSB transmit bandwidth is selectable from 100, 300, 500Hz at the high-pass edge, and 2500, 2700, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be stored in the memory. Mac software update mojave. With this flexibility of DSP based waveform shaping, transmit audio quality is adjustable depending on the operating situation.
Icom 756 Pro Iii Serial Numbers Lookup
The IC-756PROIII design focuses on distortion-free receiver performance. Basic analogue and digital technology used in the IC-7800 has been incorporated into the IC-756PROIII receiver. The front-end mixer at the RF stage is designed in a 4-element configuration. At the BPF switching stage, diodes which have superior wide dynamic range frequency characteristics and distortion-free characteristics are used. Magnetic saturation sometimes occurs in traditional coils when a strong signal is received. To avoid this magnetic saturation, large inductors have been used at the RF stage. The 15 kHz crystal roofing filter uses the same component as the IC-7800 in the fundamental mode to provide good distortion-free characteristics. Finally, each stage’s level distribution behind the 1st mixer stage and the AGC gain are optimised. The IC-756PROIII realises +30dBm class IP3*. (in 14MHz band)* Under the following conditions: Receive frequency 14.2MHz, Input frequencies 14.3MHz and 14.4MHz, Pre-amp OFF, mode USB BW: 2.4 kHzNewly designed pre-amplifiers
The IC-756PROIII has two pre-amplifiers, which offer advantages in bad band conditions. Both pre-amplifiers of the IC-756PROIII have basically the same circuit construction as the IC-7800’s preamplifiers. The preamp-1 is a noiseless feedback type with push-pull amplifiers. It has a high intercept point and covers a wide frequency range. The preamp-2 is a high gain pre-amplifier using bipolar transistors. It offers excellent advantages in using narrow band antennas such as a small loop or short Yagi antenna. This combination will provide the optimum receiver performance under any conditions. Real time spectrum scope with mini scope function
The real time spectrum scope is now an indispensable tool for high-class HF radios. The IC-756PROIII’s spectrum scope adds the mini scope function answering the many requests from end users to add this feature. The mini scope function allows you to monitor the scope screen while you are using other function menus. For example, you can monitor the scope screen even while you are changing the IF filter shape or other level settings. The scope range can be set in 4 steps 12.5 kHz, 25 kHz, 50 kHz and 100 kHz, centred on the receiving frequency. In addition, the spectrum scope has 3 levels of attenuator (10dB, 20dB and 30dB).
8 channels of RTTY transmit memory Intel atom d410 motherboard drivers for mac.
The IC-756PROIII has 8 channels of RTTY transmit memory. You can edit up to 62 character pre-fixed messages for each memory channel without a PC or other external unit. The transmit memory is displayed on the screen so that you will not send the wrong message. The built-in RTTY demodulator and decoder allow you to check the callsign of the station instantly. It is not necessary for you to prepare an external demodulator when you receive an RTTY message. The twin peak audio filter controlled by the DSP Unit reduces the interference, which appears between tones. The tuning indicator visually assists you to zero-in to the RTTY signal, which makes important tuning more easy.
* When transmitting an RTTY message on site, a Terminal Unit, TNC or PC and dedicated software is required.
@ code for memory keyerThe IC-756PROIII has 8 channels of RTTY transmit memory. You can edit up to 62 character pre-fixed messages for each memory channel without a PC or other external unit. The transmit memory is displayed on the screen so that you will not send the wrong message. The built-in RTTY demodulator and decoder allow you to check the callsign of the station instantly. It is not necessary for you to prepare an external demodulator when you receive an RTTY message. The twin peak audio filter controlled by the DSP Unit reduces the interference, which appears between tones. The tuning indicator visually assists you to zero-in to the RTTY signal, which makes important tuning more easy.
* When transmitting an RTTY message on site, a Terminal Unit, TNC or PC and dedicated software is required.
The 4 memory keyer messages store often-used CW sentences. Each memory has up to 55 character capability. The “@” code used in e-mail addresses can be sent from the memory keyer. The “@” code, (• – – • – • –) has been added to the International Morse code list recently. In addition, the serial contest number can be counted automatically. 19 cut number function is included.
Ic 756 Pro Iii Serial Numbers
RETAINED FEATURES32-bit floating-point DSP and 24-bit AD/DA converter
The 32-bit floating-point DSP and 24-bit AD/DA converter maximises the IC-756PROIII digital capabilities. This makes it possible to work a lot of digital features. In practice, the AD/DA converter realises surprisingly wide dynamic range. It provides clean and clear transmit, and crystal clear audio reception. AGC loop operation
The digital IF filter and manual notch are included in the AGC loop controlled by the DSP unit. It basically rejects blocking by extremely strong adjacent signals out of the filter pass bands. Therefore, you will rarely suffer from blocking of the AGC gain. In addition, the AGC constants are easily adjustable for each operating mode. Sharp and soft IF filter shape are independently selectable for SSB and CW mode
Icom 756 Pro Iii Manual
Sharp and soft IF filter shapes for SSB and CW have become part of the DSP unit programming. You can change the filter shape to pick up desired signals, even while listening to the signals.
SSB sharp filter; for selectivity and audio quality
https://bestgfil149.weebly.com/control-4-license-hack.html. The ideal filter shape factor and flatness in the receive bandwidth, that only DSP can achieve. This setting eliminates adjacent signals that are out of the intended bandwidth, and reproduces the signal in the bandwidth with high fidelity. This is ideal for ragchew and placing importance on the receive audio quality.
SSB soft filter; improves the clarity of weak signalshttps://bestgfil149.weebly.com/control-4-license-hack.html. The ideal filter shape factor and flatness in the receive bandwidth, that only DSP can achieve. This setting eliminates adjacent signals that are out of the intended bandwidth, and reproduces the signal in the bandwidth with high fidelity. This is ideal for ragchew and placing importance on the receive audio quality.
This filter has a rounded filter shape. It keeps down the band noise in high and low frequencies, and improves the signal-to-noise ratio. This setting makes it easy to distinguish very weak signals, even in low level noise, especially in the 50MHz band. This filter also has sharp skirt characteristics, similar to the SSB sharp filterCW sharp filter, ultimate sharpness
The ideal ‘sharp’ filter shape factor, only digital technology can bring you. This setting is suitable for picking up weak DX signals in crowded band conditions. The signal quality, not seen with analogue filters, can be clearly recognised. CW soft filter; broadens the filter skirts This filter improves the audio quality at
the edge of the filter skirt. This setting is useful when you run into pileups in contests or in DX peditions. Digital Twin PBT
The digital twin PBT, using the DSP unit, narrows the passband width to efficiently reduce interfering signals by in 50Hz steps. IF passband width, IF shift width and IF shift direction are indicated on the LCD display for easy recognition.
![Icom 756 Pro Iii Serial Numbers Icom 756 Pro Iii Serial Numbers](https://icomuk.co.uk/images/Icom/product/productImageLarge/IC_756PRO3_850x365.jpg)
The 32-bit DSP is used for the RF speech compressor providing the maximum punch without the fuzzy sound. Even when the compression is set at a higher level, the IC-756PROIII increases the readability without distortion. The tone gradation is very similar to the original sound so that the IC-756PROIII provides excellent audio at any compression level. IC-756PROIII Additional Features
• 2 clocks . the IC-756PROIII has 2 clocks built-in which show both local and UTC time at once
• Screen saver function . when the IC-756PROIII has not been operated for a while, a screen saver will be shown on the display
- +30dBm class IP3 (in 14 MHz band) and further improved 3rd order IMD characteristics
- Real time spectrum scope with miniscope function
- RTTY decoder and RTTY transmit message memory
- Selectable SSB transmission passband width (Each for higher and lower)
- AH-2B
Mobile whip & bracket - AH-4
100W HF Automatic Antenna Tuner can be used with a variety of Icom HF Amateur radios. - CT-17
CI-V level converter (communications interface) - PS-125
Switching power supply for HF/VHF base station transceivers. The major difference between the PS-125 and our current model PS-85 is its capacity. The PS-125 has a maximum 25 A capacity. - RC-28
The RC-28 IP Remote Control System, allows Radio Amateurs to remotely operate selected Icom amateur transceivers. The software comes complete with remote control USB encoder and will work with the IC-7100, IC-7200, IC-7300, IC-7410, and IC-9100 with a USB cable, and with the IC-756PROIII, IC-7000, IC-7400, IC-7610, IC-7700, IC-7800, IC-7850 and IC-7851 with a RS-232C cable. - SM-20
Desktop microphone - SP-21
Base-station loudspeaker - SP-23
The SP-23 external speaker has been designed for use with Icom base station transceivers and receivers. - UT-102
Voice synthesiser unit announces the operating mode, frequency and signal strength level, etc.
Related PDFs
Related News
Icom 756 Pro Iii Ebay
- Success for Worthing & District Amateur Radio Club at SSB Field Day 2013 - 10/12/2013
- Caister Marconi Radio Station Contacts 40 countries Using Icom Amateur Radios - 23/04/2012
- GB0RSR - ICOM’s Special Event Station On The Red Sands Offshore Fort - 21/07/2008
- Icom IC-756PROIII Keeps 30th Anniversary Clipperton DXpedition on the Air - 09/03/2008
- Icom Support Special Event Station Celebrating the Bi-Centenary of the Battle of Trafalgar - 18/09/2005
- Icom Sponsors Live 8 Amateur Radio Station - 07/07/2005
- Icom Launch IC-756PROIII at Leicester Amateur Radio Show - 23/09/2004
- GB50 - Amateur Radio Celebrating the Queens Golden Jubilee - 19/06/2002